Die Casting Aluminum High Power LED Street Light 250W Double Clip On Closure

250W LED Module Street Light, Die Casting Aluminum Led Street Light Housing

Description:

It adopts standard DC12 die-casting aluminum, which is environmentally friendly and pollution-free. It does not contain lead, mercury and other pollution elements, and has no pollution to the environment. Using high bright SMD 3030 or SMD 5050. Adopts integrated design of heat sink and lamp housing. The LED is directly connected to the outer casing, and the heat dissipation fins transfer the light source heat out fast, which fully ensure the lifetime 50,000 hours of the LED street light. The lamp housing is made of die-casting aluminum, and the reasonable structure design ensure the effective heat dissipation performance, waterproof and dustproof. The luminaire surface is with UV-resistant and anti-corrosive treatment, and the overall luminaire meets the IP66 standard.

Quick Detail:

1. Double Clip on closure,"Plug and Play" system suitable for SKD.

2. Dimming and smart lighting system available upon request.

3. Life-span over 50,000 hours,5 years warranty.

4. High pressure die cast aluminum alloy housing.

5. Anti-corrosion with electrophoresis process.

6. High performance design with multi-chips Package 5050 LED source and exclusive Lens.Stable performance,low light failure and no dead light.

7. The light transmittance up to 95%,Luminous efficacy up to 150-170lm/w.

8. Type I,II,III lens optional. Uniform light distribution apply to different street light project.

9. Excellent operating temperature -40℃~50℃.

10. Replaceable and upgradable modular design easy assembly,easy installation and easy maintenance.

11. Green product,No UV,IR radiation or mercury pollution.

Mechanical Drawing:

Distribution Curve:

Installation Diagram:

1. Correctly connect the lamp's own cable and engineering cable (connect the blue input line of the lamp power supply to the zero line of the city power line; connect the brown line to the mains power line; connect the yellow-green line to the ground line), and plug the wire Into the light pole.
2. Insert the lamp vertically or horizontally into the light pole pick arm, depending on the light pole. Suitable for light pole pick arm φ60mm;
3. After ensuring that the light fixture is stable, tighten the M10 hex socket head screw of the light fixture pressure plate to make the light fixture firmly on the light pole pick arm.